Loading...
 Start Page
COMPANY PROFILE   |   PROJECTS   |   SPACE    |   ENERGY    |   NEWS    |   CAREER   |   CONTACT   |  

PROJECTS

Projects

HEATPACK Logo

Description

HEATPACK (H2020) aims to develop and validate critical technology building blocks for enabling transformative packages for space applications with very low thermal resistance. Benefits will range from improved performance to increased components reliability & lifetime.

MMAMA Logo

Description

MMΑMA (Η2020) intends in the development of the technical characteristics with microwaves and high frequencies in the nano-level, see SMM (Scanning Microwave Microscopy), aiming to assist development and quality control of new generation nanostructured materials.

Αn ambitious project gathering a complementary characterization/modelling/materials/products set of European competences in the field of emerging energy products.

OASIS Logo

Description

OASIS (H2020) project aims at fulfilling the market potential of nano-enabled multifunctional lightweight products by:
1. Gathering the manufacturing capacity of 12 pilot lines from nanoparticles to the final product.
2. Establishing a thorough service offer for associated technical & business development
3. Granting direct access to the whole ecosystem through a Single-Entry Point, for easier access especially for SMEs.
The vision of OASIS is an ecosystem of 12 nanotechnology manufacturing pilot lines, operating under a common and demanding umbrella of Sustainable Production.
It aims at ensuring a competitive, quality, safe and environmentally friendly production of nano-enabled products in compliance with the applicable regulation.

MOHITO plus Logo

Description

MOHITO+ (Ε.Δ.Κ) is a national project aiming to expand the capabilities of the FXplyTM Pilot Line, by developing new processing modules for surface treatment, deposition, and functionalization of prepregs, textiles, and films. MOHITO+ aims to develop different methods for the functionalization of textiles and films targeting to new properties and functionalities, as well as their processing for use in new applications.

PRETZEL Logo

Description

PRETZEL (H2020) develops in novel polymeric membranes for electrolyte fuel cells (PEMEL) manufacturing, which will enable sizeable increases in efficiency and functionality satisfying the market need.
An innovative polymer electrolyte membrane electrolyzer (PEMEL) that provides significant improvements in efficiency and operability to satisfy emerging market requirements, is urgently needed for the increased demands of the grid balancing services.
In this context, PRETZEL is offering breakthrough technologies for becoming game changer in the field of water electrolyzers. First tasks on cell development and pressure housing have been accomplished and components specifications and optimization were discussed as a critical point of the project.
An important objective of PRETZEL project is to test and integrate the hydraulic compression technology, already tested in the laboratory scale, under real working conditions which is necessary for commercialization.

RECOMLABS Logo

Description

RECOMLABS (Prefecture of Western Greece) aims to develop multifunctional sandwich panels made from fiber-reinforced composites as building materials for application in the construction sector. RECOMLABS gathers up a team of six organizations, three from Western Greece and three from Romania, with more than fifteen years of active participation in EU, national and intranational research projects, which are linked with the fields of nanotechnology of composite materials, mainly for space applications.

TQMNANO Logo

Description

TQMNANO (Prefecture of Western Greece) aims to manufacture nano-reinforced products (pre-impregnated fabrics modified with carbon nanotubes and CNTs bucky papers) with traceable quality control.

Repair 3D Logo

Description

REPAIR3D (H2020) aims at the development of innovative reclamation and repurposing routes for end-of-life plastic and carbon fiber reinforced polymer (CFRP) components.

This will be achieved by employing advanced nanotechnology solutions, Additive Manufacturing (AM) and recycled resources, for the production of high added value 3D printed products with advanced functionalities.

HITEC

Description

HITEC (ESA) is a project involving both Greek and German partners and deals with the nano-enabling technologies for composites maturing at ADAMANT COMPOSITES Ltd. The scope of the project is to consolidate the materials and processes towards delivering integrated satellite panels, ideally with improved properties through nanotechnology.

LAGARD

Description

LAGARD is one of the largest ESA projects in Greece. It involves the development of Large Lightweight Stable Deployable Structures with flexible and modular design to match the needs of future science missions.

SPACENANOWELD

Description

SPACENANOWELD (ΕSA) is a project led by AMADEMA from Cyprus. It investigates the use of AMADEMA's NanoweldR technology for composites in space structures. ADAMANT COMPOSITES Ltd is a subcontractor contributing to the definition of relevant space application, supporting the materials and processes for thermoplastic prepreg, and producing the CFRP parts for the project.

 
 
 

  Patras: Aghias Lavras and Stadiou street, Patras, 26504 Platani, Rio, Achaia-Greece

  Telephone: +30 2610 931730      Fax: +30 2610 931 727

  Email: info@adamant-composites.gr

       

 
© Copyright 2020 Adamant Composites Ltd.